| 2000
TRUSS TRACK SPECIFICATIONS
Track
construction shall be as manufactured by Tru Roll, Inc. and shall
consist of two (2) parallel 1 1/4" O.D. x .049 wall (32mm x
1.2mm) steel tubing strongbacks, rolled to radii as specified. Carrier
rails shall be parallel "C" channels, fabricated from
galvanized 14 gauge (2mm) steel, concentrically roll formed to match
strongbacks. Carrier rails shall be supported from tubing by precision
aluminum castings spaced at 24" (762mm) maximum. Supports for
track shall be provided at 5'-0" (1524mm) centers. Master carriers
shall be four wheel construction, with articulating pivot device
joining two precision cast aluminum bodies. Nylon idling rollers
shall be mounted within casting supports and maintain operating
lines inside track envelope. Carrier design shall incorporate fin-guided
nylon 6/6 bodies with neoprene-tired [ball-bearing nylon] wheels
riveted parallel to the body. Track carriers shall include an integral
neoprene bumper at top of body to ensure automatic alignment with
adjacent carriers. Carriers shall be furnished at 12" (305mm)
on center, with heavy duty swivel and trim chain for drapery attachment.
Floor block shall provide proper tension on operating line of 1/4"
(6.4mm)diameter nylon-coated wire rope or 3/8" bell cord [stretch-resistant
bell cord with bronze wire center]. Click here
to Download a DWG Layout file (zipped for downloading).
Additional
Product Information and Ordering Links
NO. 2200 TRUSS
TRACK SPECIFICATIONS
Track construction
shall be as manufactured by Tru Roll, Inc. and shall consist of
two (2) parallel 5/8" O.D. x.049 wall (16mm xl.2mm) steel tubing
strongbacks, rolled to radii as specified. Carrier raiIs shall be
parallel "C" channels, fabricated from .075" (2mm)
aluminum extrusion, concentrically roll formed to match strongbacks.
Carrier rails shall be supported from tubing by precision aluminum
casting spaced at 24"(610mm) maximum. Supports for track system
shall be provided at 4'-0" (1219mm) centers. Master carriers
shall be four wheel construction with precision cast aluminum bodies.
Nylon idling rollers shall be mounted within casting supports and
maintain operating lines inside track envelope. Carrier design shall
incorporate fin-guided nylon 6/6 bodies with nylon wheels and steel
axles. Track carriers shall include an integral nylon bumper at
top of body to ensure automatic alignment with adjacent carriers.
Carriers shall be furnished at 12" (305mm) on center, with
heavy duty swivel and trim chain for drapery attachment. Spring
loaded floor block shall maintain proper tension on operating line
of 1/4" dia. bell cord (stretch-resistant bell cord with bronze
wire center or 3/16" (5mm) diameter nylon-coated wire rope
for motorized operation). Click
here to Download a DWG Layout file (zipped for downloading).
Additional
Product Information and Ordering Links |
|
