| 2300
CYCLORAMA TRACK SPECIFICATIONS
Track shall be as manufactured by Tru Roll,
Inc. Track
strongback shall be 1 1/4" O.D. x.049 wall (32mm x 1.2mm) steel
tubing, roll-formed to specifications. Carrier rails shall be parallel
"C" channels, fabricated from 14 gauge (2mm) aluminum
extrusion, concentrically rollformedto match strongback. Rail supports
shall be spaced at no greater than 24" (610mm). Supports for
track shall be provided at 4'-0" (1219mm) centers. Master carriers
shall be four wheel construction, with nylon-coated wire rope pull
line and welded 3" (76mm) diameter steel ring at floor level
for walk along operation. Carrier design shall incorporate fin-guided
nylon 6/6 bodies with nylon wheels and steel axles, with molded
nylon bumper at top of carrier body to ensure automatic alignment
with adjacent carriers. Carriers shall be furnished at 12"
(305mm) on center, with heavy duty swivel and trim chain for drapery
attachment. End stops shall be installed at all open track ends
to prevent leader overtravel. Click
here to Download a DWG Layout file (zipped for downloading).
Additional
Product Information and Ordering Links
NO. 2500 CYCLORAMA
TRACK SPECIFICATIONS
Track shall
be as manufactured by Tru Roll, Inc. Track
strongback shall be 2" O.D. x .049 wall (51 mm x 1.2mm) steel
tubing, roll-formed to specifications. Carrier rails shall be parallel
"C" channels, fabricated from galvanized 14 gauge (2mm)
steel, concentrically roll formed to match strongback. Rail supports
shall be spaced at no greater than 30" (762mm). Supports for
track shall be provided at 5'-0" (1524mm) centers. Master carriers
shall be four wheel construction with steel body, nylon-coated wire
rope pull line, and welded 3" (76mm) diameter steel ring at
floor level for walk along operation. Carrier design shall incorporate
fin-guided, molded nylon 6/6 bodies, and neoprene-tired [ball-bearing
nylon] wheels riveted parallel to the body, and include an integral
neoprene bumper at top of body to ensure automatic alignment with
adjacent carriers. Carriers shall be furnished at 12" (305mm)
on center, with heavy duty swivel and trim chain for drapery attachment.
End stops shall be installed at all open track ends to prevent leader
overtravel. Click here to Download a DWG Layout
file (zipped for downloading).
Additional
Product Information and Ordering Links |
|
